Summit Series Can-Am 4 Seater Light Roof

$0.00

SPECS

Can be built to order but has no user-serviceable parts. Completely pre-wired.  Installed roof and run wires to battery.

  • 14ga A36 steel construction

  • Rain guard front and back

  • 4” storage rack with 1” tie-down spots

  • 3/16 welded plate in the back for winch mount (excluding E-K32-15-1001)

  • E-K32-15-1001 The Rear part of the roof is hinged like the stock plastic roof.  This allows the rear of the roof to move up via gas shocks and the extended bed to dump.

  • (Kawasaki only) rear ⅛ plate support piece

  • Full 360°  light options

  • 6 industrial standard switches (red light when on)

  • PLashlights white dome light

  • Resettable circuit breakers for each light

  • Fused main power.

  • It does not drain the battery.  When off, the roof is completely off

  • The roof sits in the frame.  Easy to bolt on

  • Does not interfere with doors

  • 3500lb winch (optional)

  • Can be built to order but has no user-serviceable parts

  • Completely pre-wired.  Install roof and run wires to the battery

Front Light Options:
45* Front Corner Light Options:
Side Lights Options(Driver & Passenger individually ran by switch):
Rear Light Options:
Winch Options:
Quantity:
Add To Cart

SPECS

Can be built to order but has no user-serviceable parts. Completely pre-wired.  Installed roof and run wires to battery.

  • 14ga A36 steel construction

  • Rain guard front and back

  • 4” storage rack with 1” tie-down spots

  • 3/16 welded plate in the back for winch mount (excluding E-K32-15-1001)

  • E-K32-15-1001 The Rear part of the roof is hinged like the stock plastic roof.  This allows the rear of the roof to move up via gas shocks and the extended bed to dump.

  • (Kawasaki only) rear ⅛ plate support piece

  • Full 360°  light options

  • 6 industrial standard switches (red light when on)

  • PLashlights white dome light

  • Resettable circuit breakers for each light

  • Fused main power.

  • It does not drain the battery.  When off, the roof is completely off

  • The roof sits in the frame.  Easy to bolt on

  • Does not interfere with doors

  • 3500lb winch (optional)

  • Can be built to order but has no user-serviceable parts

  • Completely pre-wired.  Install roof and run wires to the battery

SPECS

Can be built to order but has no user-serviceable parts. Completely pre-wired.  Installed roof and run wires to battery.

  • 14ga A36 steel construction

  • Rain guard front and back

  • 4” storage rack with 1” tie-down spots

  • 3/16 welded plate in the back for winch mount (excluding E-K32-15-1001)

  • E-K32-15-1001 The Rear part of the roof is hinged like the stock plastic roof.  This allows the rear of the roof to move up via gas shocks and the extended bed to dump.

  • (Kawasaki only) rear ⅛ plate support piece

  • Full 360°  light options

  • 6 industrial standard switches (red light when on)

  • PLashlights white dome light

  • Resettable circuit breakers for each light

  • Fused main power.

  • It does not drain the battery.  When off, the roof is completely off

  • The roof sits in the frame.  Easy to bolt on

  • Does not interfere with doors

  • 3500lb winch (optional)

  • Can be built to order but has no user-serviceable parts

  • Completely pre-wired.  Install roof and run wires to the battery

OPTIONS

  • Front

    • None

    • B-LGK-0016 - 30” PlashLights light bar

    • B-LGK-0038 - 32” Daytona light bar

  • 45° front corner lights

    • None

    • B-LGK-0002 - PlashLights Diffused cube

    • B-LGK-0003 - PlashLight flood cube

    • B-LGK-0040 - Daytona flood cube

  • Side Lights (Driver & Passenger individually ran by switch)

    • None

    • B-LGK-0014-2 - Plashlights 10” light bar qty 2 

    • B-LGK-0014-4 - PlashLights 10” light bar qty 4 

    • B-LGK-0039-2 - Daytona 8” light bar qty 2

    • B-LGK-0040-4 - Daytona 8” light bar qty 4

  • Rear Lights

    • None

    • B-LGK-0002 - PlashLights Diffused cube

    • B-LGK-0003 - Plashlights flood cube

    • B-LGK-0040 - Daytona flush mount

    • B-LGK-0039 - Daytona 8” light bar (qty 1)  (This is a custom option and is built to order.  Winch (D-WINK-0001) is not compatible)

  • DOME LIGHT

    • Red, Green, or Amber can be changed out for the same price


Winch Option

  • D-WINK-0001 - complete roof-mounted winch rear facing with remote control and switch on the driver’s side

  • E-C22-15-1001

Summit Front Base Bumper
from $660.00
Summit Grill Guard Front Bumper
from $910.00
Summit Series Hood Basket
from $540.00
Summit Series Rear Fender
from $250.00
Summit Bull Bar Front Bumper
from $790.00